|
جزئیات محصول:
پرداخت:
|
تست فشار: | ~ 16KPa | محدوده اندازه گیری فشار میکرو: | K 0.1KPa |
---|---|---|---|
وضوح فشار: | 0.1kPa | دقت زمان: | 1/0 |
آزمایش متوسط: | خون مصنوعی | حجم خون: | 2ml |
برجسته: | دستگاه تست ماسک,تجهیزات تست ماسک |
ماسک های پزشکی 16KPa Pressure 2mL فشار خون سنجش مصنوعی
بررسی اجمالی محصولات:
The medical mask synthetic blood penetration tester is used to measure the jet penetration performance of liquid sources such as synthetic blood to evaluate mask's safety protection performance. از آزمایشگر نفوذ خون مصنوعی ماسک پزشکی برای اندازه گیری عملکرد نفوذ جت از منابع مایع مانند خون مصنوعی برای ارزیابی عملکرد حفاظت از ایمنی ماسک استفاده می شود. Mainly used to test the permeability of masks to blood, body fluids, blood pathogens (tested with Phi-X174 antibiotics), synthetic blood and other liquids. به طور عمده برای تست نفوذپذیری ماسک ها به خون ، مایعات بدن ، پاتوژن های خونی (آزمایش شده با آنتی بیوتیک های Phi-X174) ، خون مصنوعی و مایعات دیگر استفاده می شود. It is suitable for liquid penetration resistance of protective equipment such as masks, gloves, protective clothing, outer cover, coveralls, boots and other protective equipment. برای مقاومت در برابر نفوذ مایع تجهیزات محافظتی مانند ماسک ، دستکش ، لباس محافظ ، پوشش بیرونی ، روپوش ، چکمه و سایر تجهیزات محافظ مناسب است. این تجهیزات می توانند گزارش آزمایش را منتشر کرده و داده های آزمایش را ذخیره کنند.
روش آزمون:
The medical mask sample is supported on the test device, and 2mL of synthetic blood with a surface tension of 0.042 ± 0.002n / m is sprayed from a cannula with an inner diameter of 0.84mm at a distance of 300mm to the mask under test at a pressure of 16kpa in the horizontal direction. نمونه ماسک پزشکی بر روی دستگاه آزمایش پشتیبانی می شود و 2 میلی لیتر خون مصنوعی با کشش سطحی 0/42 0.0 0.02n / m از یک کانول با قطر داخلی 0.84 میلی متر در فاصله 300 میلی متر تا ماسک تحت آزمایش در فشار 16kpa در جهت افقی. Simulate the scene of the mask being splashed by blood from the perforated blood vessel. صحنه ماسک که توسط خون از رگ خونی سوراخ شده پاشیده می شود را شبیه سازی کنید. Take off and visually check the penetration of synthetic blood on the other side of the mask within 10 seconds. خاموش شوید و از نظر بصری نفوذ خون مصنوعی در طرف دیگر ماسک را طی 10 ثانیه بررسی کنید. Test the medical mask with the corresponding liquid jet pressure of 450cm / s, 550cm / s, 635cm / s, record the test result of each jet velocity, give out the highest blood pressure corresponding to the acceptable quality level limit of 4 for medical masks. آزمایش ماسک پزشکی با فشار جت مایع مربوط به 450cm / s ، 550cm / s ، 635cm / s ، نتیجه آزمایش هر سرعت جت را ضبط کنید ، بالاترین فشار خون مربوط به حد مجاز کیفیت قابل قبول 4 برای ماسک های پزشکی را داشته باشید .
پارامترهای فنی:
اصل آزمون پایه | تنفس را از طریق پمپ خلاء شبیه سازی کرده و تشخیص اختلاف فشار را انجام دهید | |
پارامترهای اصلی | تست فشار | ~ 16KPa |
محدوده اندازه گیری فشار میکرو | K 0.1KPa | |
وضوح مقدار فشار | 0.1kPa | |
دقت زمان | 1/0 | |
محیط آزمایش | خون مصنوعی | |
روش کنترل | کتابچه راهنمای | |
حجم خون | 2ml | |
دامنه کاربرد | ماسک جراحی |
تماس با شخص: Ms. Zoe Zou
تلفن: +86 13527656435
فکس: 86-020-39185976