logo
محصولات
جزئیات محصولات
صفحه اصلی > محصولات >
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus

TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus

مقدار تولیدی: 1
قیمت: قابل مذاکره
بسته بندی استاندارد: کیس تخته سه لا
دوره تحویل: 30 روز
روش پرداخت: T/T
ظرفیت تامین: 10 در ماه
جزئیات اطلاعات
محل منبع
چین
نام تجاری
Sinuo
گواهی
Calibration Certificate (Cost Additional)
شماره مدل
SN1612
ایستگاه تست:
تک ایستگاه
روش کنترل:
کنترل PLC
اندازه پلت فرم:
400 میلی متر*400 میلی متر
کانال دما:
4 کانال
دمای گرمایش:
Rt~ 100 درجه سانتی گراد
زمان تست:
0-99H99M99S
توضیحات محصول
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus
This equipment complies with the test standard requirements of Clause 10.7 according to TZS 683:2022 and Clause 14.8 according to ES 573:2021.
Testing Procedure
  1. The utensil shall be filled with water at 23°C + 2°C up to 90% of its nominated capacity, and the lid (if provided) placed in position.
  2. The water shall be heated using an electric heating coil immersed in the water, so as to reach boiling point within 15 minutes to 20 minutes.
  3. The temperature of the handle shall be measured not less than 15 minutes after the water starts to boil, by means of thermocouples fixed to points A and B indicated in figure 1.
  4. The temperature shall be recorded and compared with those specified.
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 0
Figure 1: Thermocouple placement diagram
Technical Specifications
Parameter Specification
Control PLC control, 7" touch screen operation
Station Single station
Platform size 400mm × 400mm
Temperature recording channel 4 channels (A point, B point, Ambient temperature, Reserve)
Heating temperature Rt ~ 100°C
Temperature measuring method By means of thermocouples fixed to points A and B indicated in figure 1
Test time 0-99H99M99S, can be preset on touch screen
Electric heating coil Electric heating coil material: copper. The electric heating coil can be immersed in water. The electric heating coil on/off will be controlled to be capable of heating water till boiling through duration time from 15 min to 20min
Temperature recording Touch screen display, Temperature and time can be displayed
Power supply AC220V, 50Hz, 3kW
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 1
Front view of test apparatus
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 2
Side view of test apparatus
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 3
محصولات
جزئیات محصولات
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus
مقدار تولیدی: 1
قیمت: قابل مذاکره
بسته بندی استاندارد: کیس تخته سه لا
دوره تحویل: 30 روز
روش پرداخت: T/T
ظرفیت تامین: 10 در ماه
جزئیات اطلاعات
محل منبع
چین
نام تجاری
Sinuo
گواهی
Calibration Certificate (Cost Additional)
شماره مدل
SN1612
ایستگاه تست:
تک ایستگاه
روش کنترل:
کنترل PLC
اندازه پلت فرم:
400 میلی متر*400 میلی متر
کانال دما:
4 کانال
دمای گرمایش:
Rt~ 100 درجه سانتی گراد
زمان تست:
0-99H99M99S
مقدار حداقل تعداد سفارش:
1
قیمت:
قابل مذاکره
جزئیات بسته بندی:
کیس تخته سه لا
زمان تحویل:
30 روز
شرایط پرداخت:
T/T
قابلیت ارائه:
10 در ماه
توضیحات محصول
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus
This equipment complies with the test standard requirements of Clause 10.7 according to TZS 683:2022 and Clause 14.8 according to ES 573:2021.
Testing Procedure
  1. The utensil shall be filled with water at 23°C + 2°C up to 90% of its nominated capacity, and the lid (if provided) placed in position.
  2. The water shall be heated using an electric heating coil immersed in the water, so as to reach boiling point within 15 minutes to 20 minutes.
  3. The temperature of the handle shall be measured not less than 15 minutes after the water starts to boil, by means of thermocouples fixed to points A and B indicated in figure 1.
  4. The temperature shall be recorded and compared with those specified.
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 0
Figure 1: Thermocouple placement diagram
Technical Specifications
Parameter Specification
Control PLC control, 7" touch screen operation
Station Single station
Platform size 400mm × 400mm
Temperature recording channel 4 channels (A point, B point, Ambient temperature, Reserve)
Heating temperature Rt ~ 100°C
Temperature measuring method By means of thermocouples fixed to points A and B indicated in figure 1
Test time 0-99H99M99S, can be preset on touch screen
Electric heating coil Electric heating coil material: copper. The electric heating coil can be immersed in water. The electric heating coil on/off will be controlled to be capable of heating water till boiling through duration time from 15 min to 20min
Temperature recording Touch screen display, Temperature and time can be displayed
Power supply AC220V, 50Hz, 3kW
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 1
Front view of test apparatus
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 2
Side view of test apparatus
TZS 683:2022 Clause 10.7 Non-Metallic Handles Thermal Insulation Test Apparatus 3
نقشه سایت |  سیاست حفظ حریم خصوصی | چین خوب کیفیت تجهیزات تست لوازم برقی عرضه کننده. حقوق چاپ 2019-2026 Sinuo Testing Equipment Co. , Limited . همه حقوق محفوظ است.